Tesla Model Y: To Use Autopark
When driving, follow these steps to allow Autopark to maneuver Model Y into a parking space:
1. While driving slowly on a public road, monitor the instrument panel to determine when Autopark has detected a parking space. The instrument panel will display a parking icon if the vehicle detects a potential parking spot.
.png)
NOTE: The parking icon appears only if the vehicle's position and/or the circumstances of the surrounding area are such that Autopark can determine an appropriate driving path. If Autopark cannot determine an appropriate path (for example, when driving on a narrow street where moving into the parking space causes the front of the vehicle to extend into the adjacent lane), you can either reposition the vehicle, find a different parking space, or park manually.
2. Check to determine if the detected parking space is appropriate and safe. If so, pull forward and stop approximately one car length ahead of the parking space (as you normally would when parallel parking or when backing into a perpendicular parking space).
3. Release the steering wheel, shift Model Y into Reverse, then touch Start Autopark on the touchscreen.
4. Autopark displays a message when parking is complete.
NOTE: If you press the brake pedal when Autopark is actively parking Model Y, the parking process pauses until you touch Resume on the touchscreen.
WARNING: Never depend on Autopark to find a parking space that is legal, suitable, and safe. Autopark may not always detect objects in the parking space. Always perform visual checks to confirm that a parking space is appropriate and safe.
WARNING: When Autopark is actively steering Model Y, the steering wheel moves in accordance with Autopark's adjustments. Do not interfere with the movement of the steering wheel. Doing so cancels Autopark.
WARNING: During the parking sequence, continually check your surroundings. Be prepared to apply the brakes to avoid vehicles, pedestrians, or objects.
WARNING: When Autopark is active, monitor the touchscreen and instrument panel to ensure that you are aware of the instructions that Autopark is providing.
READ NEXT:
To Pause Parking
To pause Autopark, press the brake pedal once. Model Y
stops and remains stopped until you touch Resume on
the touchscreen.
To Cancel Parking
Autopark cancels the parking sequence when you
manually
Summon
NOTE: Depending on market region, vehicle
configuration, options purchased, and software version,
your vehicle may not be equipped with Summon, or the
feature may not operate exactly as described.
Before Using Summon
Before operating Summon, use the touchscreen to
enable it and customize how you want it to work. Touch
Controls > Autopilot > Customize Summon and adjust
the following settings to suit your p
SEE MORE:
Cleaning a Camera
To ensure a clear picture, the camera lens must be clean
and free of obstructions. Remove any build-up of dirt or
debris by spraying water onto the camera lens with a
spray bottle or pressure washer.
CAUTION: Do not attempt to remove dirt or debris
by wiping an exposed lens with your hands or a
Park
Press the end of the drive stalk while Model Y is stopped.
Model Y automatically shifts into Park whenever you connect a charge cable or
if two or more of the following conditions are met simultaneously while
traveling slower than approximately 1.5 mph (2 km/h):
The driver's seat belt is unbuck
