Tesla Model Y: Touchscreen
Clean the touchscreen and instrument panel using a soft lint-free cloth specifically designed to clean monitors and displays. Do not use cleaners (such as a glass cleaner) or alcohol-based gel products (such as hand sanitizer) and do not use a wet wipe or a dry statically- charged cloth (such as a recently washed microfiber). To wipe the touchscreen without activating buttons and changing settings, you can enable Screen Clean Mode. Touch Controls > Display > Screen Clean Mode. The display darkens to make it easy to see dust and smudges. To exit Screen Clean Mode, press and hold HOLD TO EXIT.
Chrome and Metal Surfaces
Polish, abrasive cleaners, alcohol-based gel products (such as hand sanitizer), and hard cloths can damage the finish on chrome and metal surfaces.
Cautions for Interior Cleaning
CAUTION: Using solvents (including alcohol), alcohol-based gel products (such as hand sanitizer), bleach, citrus, naphtha, or silicone-based products or additives on interior components can cause damage.
CAUTION: Statically-charged materials can cause damage to the touchscreen or instrument panel.
WARNING: If you notice any damage on an airbag or seat belt, contact Tesla immediately.
WARNING: Do not allow any water, cleaners, or fabric to enter a seat belt mechanism.
WARNING: Exposure to chemical cleaners can be hazardous and can irritate eyes and skin. Read and observe the instructions provided by the manufacturer of the chemical cleaner.
READ NEXT:
Polishing, Touch Up, and Body
Repair
To preserve the cosmetic appearance of the body, you
can occasionally treat the paint surfaces with an
approved polish containing:
Very mild abrasive to remove surface contamination
without remo
Using a Car Cover
To preserve the cosmetic appearance of the body when
Model Y is not being used, use a genuine Tesla car cover.
Car covers can be purchased from Tesla. See Parts and
Accessories.
CAUTION: Use only
SEE MORE:
Auto Opening and Closing
To operate a HomeLink device without using the
touchscreen, you can automate the device to open as
you approach, and close as you drive away:
1. Touch the HomeLink icon at the top of the Controls
screen, then choose the device you want to
automate.
2. Select the Auto-open when arriving checkbox
Turn Signals
The turn signals flash three times or continuously, depending on how far up
or down you move the stalk. Lightly push the turn signal stalk up or down for a
three-flash sequence. For a continuous signal, push the stalk fully up or down.
The turn signals stop operating when canceled by the steerin
