Tesla Model Y: Charging Equipment
Charging equipment designed specifically to charge your Model Y is available from Tesla. A Tesla Wall Connector, which installs in your parking space, is the fastest way to charge Model Y for daily use.
Model Y can also be charged using a Mobile Connector and the appropriate adapter(s) that allows you to plug into most commonly used power outlets. When using the Mobile Connector, first plug the Mobile Connector into the power outlet, attach the adapter (if needed), and then plug in Model Y. Mobile Connectors and/or additional adapters can be purchased from Tesla stores or online at www.tesla.com.
Tesla offers adapters (for example, J1772, CHAdeMO, and Combined Charging System (CCS) ) to allow you to plug into the most commonly used public charging stations in your region. Open the charge port door using the touchscreen (see Charging Instructions), plug the adapter into the charging port on Model Y, and then connect the station's charging connector to the adapter. For information on the charging equipment available for your region, go to www.tesla.com, choose your region, and then view the available charging options.
More details on public charging station adapters is available at https://www.tesla.com/chademo.
READ NEXT:
About the High Voltage Battery
Model Y has one of the most sophisticated battery
systems in the world. The most important way to
preserve the high voltage Battery is to LEAVE YOUR
VEHICLE PLUGGED IN when you are not using it. Th
Battery Care
Never allow the Battery to fully discharge. Even when
Model Y is not being driven, its Battery discharges very
slowly to power the onboard electronics. The Battery
can discharge at a rate of approx
SEE MORE:
Testing Seat Belts
To confirm that seat belts are operating correctly,
perform these three simple checks on each seat belt.
1. With the seat belt fastened, give the webbing nearest
the buckle a quick pull. The buckle should remain
securely locked.
2. With the belt unfastened, unreel the webbing to its
limit. Check
Removing/Installing a Head Support
All head supports in the second and third
row (if equipped) seating positions can be removed. To remove a head support:
1. Fully raise the head support by pulling
it upward.
2. Press and hold the button located at the
base of one of the posts.
3. Insert a short, flat object (such as
a small flat
