Tesla Model Y: Dashcam and Sentry Mode
NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with Dashcam or Sentry Mode or the features may not operate exactly as described. Please note it is your sole responsibility to consult and comply with all local regulations and property restrictions regarding the use of cameras.
In addition to supporting Autopilot, the exterior cameras can record and store video footage of the vehicle's surroundings on a USB flash drive. This can be convenient in situations where you want a video recording of a particular incident. If set to AUTO, Dashcam saves video recordings of collisions when driving. On the other hand, if enabled, Sentry Mode is the alarm system that monitors the environment around your vehicle when it is locked and in Park. After an incident is detected, Sentry Mode responds according to the level of threat detected.
NOTE: For saving Sentry Mode and Dashcam footage, Tesla recommends using the USB port located in the glovebox. Doing so increases security and minimizes power consumption.
NOTE: You can use the glovebox USB port to store a combination of dashcam, Sentry Mode, and Track Mode content in addition to audio files.
NOTE: Dashcam and Sentry Mode will not record video when Dashcam is OFF.
NOTE: To protect your privacy, video recordings are saved locally to onboard memory or the USB flash drive. Recordings are not sent to Tesla.
- Using Dashcam
- Using Sentry Mode
- Standby, Alert, and Alarm States
- Sentry Mode - View Live Camera
- Viewing Video Recordings
READ NEXT:
Using Dashcam
Dashcam records footage of your vehicle's surroundings
when the touchscreen is powered on (see Starting and
Powering Off). Dashcam does not record
video when your vehicle is powered off. Use Dashca
Using Sentry Mode
When Sentry Mode is turned on, the cameras and
sensors remain powered on and ready to record
suspicious activity around your vehicle when Model Y is
locked and in Park.
To store and retrieve Sentry
Standby, Alert, and Alarm States
While in Sentry Mode, Model Y may shift through three
states as a response to its surroundings-Standby, Alert,
and Alarm:
Standby. Model Y is automatically "on standby" when
you activate Sentry
SEE MORE:
Moving Second Row Seats (7-seater only)
Lift the bar located beneath each outboard
seating position to unlock and move the second row seats forward or rearward.
The bench seats have a 60/40 split. Therefore, the bar on the left side moves
the seat for the left and center seats, whereas the bar on the right side moves
only the rightmos
Installing LATCH (ISOFIX) Child
Seats
Lower LATCH anchors are provided in the second row
outboard seats. The anchors are located between the
seat's back rest and rear cushion. The exact location of
each anchor is identified by a child safety seat identification button, illustrated below. The button is
located on the seat back, direc
