Tesla Model Y: Speed Limit Mode
Speed Limit Mode allows you to limit acceleration and limit the maximum driving speed to a chosen value between 50 and 120 mph (80 and 193 km/h). The first time you use this feature, you must create a 4-digit PIN that you must use to enable and disable Speed Limit Mode. When enabled and the driving speed approaches within approximately 3 mph (5 km/h) of the maximum speed, a chime sounds, the instrument cluster displays a message, and Model Y sends a notification to the mobile app. You can also touch Security > Speed Limit Mode to enable from the Tesla mobile app. To enable Speed Limit Mode:
1. Ensure Model Y is in Park.
2. Touch Controls > Safety > Speed Limit Mode on the touchscreen.
3. Select the maximum driving speed.
4. Drag the slider to the On position.
5. Enter the 4-digit PIN that you want to use to enable and disable Speed Limit Mode.
NOTE: If you forget the PIN, you can disable Speed Limit Mode by entering login credentials for your Tesla account.
NOTE: While Speed Limit Mode is enabled, the acceleration setting (Controls > Pedals & Steering > Acceleration) automatically sets to Chill.
WARNING: Driving downhill can increase driving speed and cause Model Y to exceed your chosen maximum speed.
WARNING: Speed Limit Mode is not a replacement for good judgment, driver training, and the need to closely monitor speed limits and driving conditions. Accidents occur at any speed.
READ NEXT:
Dashcam and Sentry Mode
NOTE: Depending on market region, vehicle
configuration, options purchased, and software version,
your vehicle may not be equipped with Dashcam or
Sentry Mode or the features may not operate exactl
Using Dashcam
Dashcam records footage of your vehicle's surroundings
when the touchscreen is powered on (see Starting and
Powering Off). Dashcam does not record
video when your vehicle is powered off. Use Dashca
Using Sentry Mode
When Sentry Mode is turned on, the cameras and
sensors remain powered on and ready to record
suspicious activity around your vehicle when Model Y is
locked and in Park.
To store and retrieve Sentry
SEE MORE:
Testing a Child Safety Seat
Before seating a child, always make sure the child safety
seat is not loose:
1. Hold the child safety seat by the belt path and try to
slide the safety seat from side to side and front to
back.
2. If the seat moves more than one inch (2.5 cm), it is
too loose. Tighten the belt or reconnect the
Pull Onto Flatbed Truck From Front
NOTE: If Model Y has no low voltage power, you need an
external low voltage power supply to open the hood or use the touchscreen.
CAUTION: To avoid damage, only pull the vehicle
onto a flatbed truck using a properly-installed tow
eye. Using the chassis, frame, or suspension
components to pull th
