Tesla Model Y: Traffic-Aware Cruise Control
NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with Traffic-Aware Cruise Control, or the feature may not operate exactly as described. If your vehicle is not equipped, refer to the owner's manual on your vehicle's touchscreen for instructions on how to use Cruise Control.
NOTE: Traffic-Aware Cruise Control is a BETA feature.
Traffic-Aware Cruise Control determines when there is a vehicle in front of you in the same lane. If the area in front of Model Y is clear, Traffic-Aware Cruise Control maintains a set driving speed. When a vehicle is detected, Traffic-Aware Cruise Control is designed to slow down Model Y as needed to maintain a selected time-based distance from the vehicle in front, up to the set speed. Traffic-Aware Cruise Control does not eliminate the need to watch the road in front of you and to manually apply the brakes when needed.
Traffic-Aware Cruise Control is primarily intended for driving on dry, straight roads, such as highways.
CAUTION: Ensure all cameras and sensors are clean before each drive. Dirty cameras and sensors, as well as environmental conditions such as rain and faded lane markings, can affect Autopilot performance.
WARNING: Traffic-Aware Cruise Control is designed for your driving comfort and convenience and is not a collision warning or avoidance system. It is your responsibility to stay alert, drive safely, and be in control of the vehicle at all times. Never depend on Traffic-Aware Cruise Control to adequately slow down Model Y. Always watch the road in front of you and be prepared to take corrective action at all times. Failure to do so can result in serious injury or death.
WARNING: Although Traffic-Aware Cruise Control is capable of detecting pedestrians and cyclists, never depend on Traffic-Aware Cruise Control to adequately slow Model Y down for them. Always watch the road in front of you and be prepared to take corrective action at all times. Failure to do so can result in serious injury or death.
WARNING: Do not use Traffic-Aware Cruise Control on winding roads with sharp curves, on icy or slippery road surfaces, or when weather conditions (such as heavy rain, snow, fog, etc.) make it inappropriate to drive at a consistent speed. Traffic-Aware Cruise Control does not adapt driving speed based on road and driving conditions.
- To Use Traffic-Aware Cruise Control
- Changing the Cruising Speed
- HOLD State
- Adjust the Following Distance
- Overtake Acceleration
- Canceling and Resuming
- Summary of Cruise Indicators
READ NEXT:
To Use Traffic-Aware Cruise Control
To initiate Traffic-Aware Cruise Control when no vehicle
is detected ahead of you, you must be driving at least
18 mph (30 km/h), unless certain vehicle and
environmental conditions are met, in whi
Changing the Cruising Speed
Roll the right scroll wheel up to increase, or down to
decrease, the set speed. Slowly rolling the scroll wheel
changes the set speed in 1 mph (1 km/h) increments and
quickly rolling the scroll whe
HOLD State
When following a vehicle, Traffic-Aware Cruise Control
remains active at low speeds, even when Model Y comes
to a full stop. When the vehicle is moving again, Traffic-
Aware Cruise Control resumes o
SEE MORE:
Trailer Towing
The maximum trailer weight (including all
cargo and additional equipment), and the trailer tongue weight depend on the
number of occupants in your vehicle and the tires being used. The maximum towing
capacity and trailer tongue weight must never exceed the following:
*Applicable only to vehicle
Restricted Speed
On a controlled-access highway, the cruising speed
reflects the speed limit, taking into consideration any
off set you've specified using Speed Assist. However, if
you choose to use Autosteer on residential roads, a road
without a center divider, or a road where access is not
limited, Autosteer
